TcpMDT Professional

Win32 and 64, English

APLITOP

All-in-one solution for Surveying and Civil Engineering projects

Version History

General Usage Instructions

The application does not require a strict workflow and there may be several ways to use it depending on the type of project. Here there are some examples:

Create a DTM

-Import the points file from GNSS receiver or total station with command Points > Import

-Draw additional breaklines with Break Lines menu commands

-Create the surface with command Surfaces > Create Surface

-Generate the contour lines with command Contours/Cartography > Contours

-Analyze the terrain with commands in menu Map/Render

Draw profiles from surface or cartography

-Draw a polyline along the aligment

-Convert polyline to alignment with command Alignments > Convert polyline to alignment

-Compute and draw profiles with command Profiles > Get profile

-Compute and draw cross-sections with command Cross-Sections > Get cross-sections

Compute volumes from surfaces difference

-Create surfaces for existing and final ground

-Run command Quantity take-off > Volumes > Surfaces difference

Design a road

-Design an horizontal alignment with Alignments or Elements menus commands

-Compute and draw profiles with command Profiles > Get profile

-Design a vertical alignment over the profile with command Grade lines > Define grade line

-Compute cross-sections with command Cross-Sections > Get cross-sections

-Design road sections with command Templates > Define/Edit

-Put together horizontal and vertical alignment, profile, cross-sections and templates with command Road/Segments > Define/Edit

-Obtain the final design of the road with command Surfaces > Get modified terrain.

-Generate area and volume reports with commands in menu Quantity take-off.

-Generate stakeout reports with commands in menu Setting out.

Screenshots

Commands

Ribbon/Toolbar Icon	Command	Command Description
	MDT8_PUNTOS_IMPOR	Imports a point coordinates file.
	MDT8_SUP_TRI	Creates a new surface from points, contour lines or 3D entities. It can consider or not break lines.
	MDT8_CURVADO_MDT	Generates contour lines from the current surface.
	MDT8_EJES_CONVPOLI	Converts a polyline to an horizontal alignment.
	MDT8_LONG_GENERA	Gets and draws a profile from current surface or 3D entities.
	MDT8_transver_ptransvpl	Gets and draws cross-sections from the current surface or 3D entities
	MDT8_volumenes_difmodelos	Calculates cut and fill volumes by difference of surfaces.