Slope Pattern with Benchs

Slope Pattern with Benchs

Win32 和 64, 简体中文

ADSON A N BALBINO ENGENHARIA
Draw the slope pattern between two polylines. Configure the command through a dialog box to choose ticks interval, bench distance, and other options.

常规使用说明

Type ADSLP in the command line and press enter or click on the ribbon button at the Add-ins tab.

Select the slope top polyline or press S and Enter to open the settings dialog box.

In the dialog box, you can define whether the pattern will be orthogonal to the bottom polyline (usually in cut slopes) or top polyline (usually in fill slopes), and the distance between pattern ticks. Also, you can choose to consider benchs. In this case, define the planned distance between benchs and the planned width of benchs, and the pattern will be drawn considering benchs, as the example screenshots. Set the options as you prefer and click OK.

After the set, dialog box, select the slope top polyline and then select the slope bottom polyline to draw the slope pattern as configured.

You can set the dialog box one time. The settings will remain saved while your file is open. Access the dialog box again only if you want to change the settings, by pressing S when the command starts.

屏幕快照

命令

功能区/工具栏图标 命令 命令描述

ADSLP

Select the slope top polyline or press S and Enter to open the settings dialog box.

安装/卸载

The installer that was run when you downloaded this app/plugin from the Autodesk App Store will start installing the app/plugin. OR, simply double-click the downloaded installer to install the app/plugin. You may need to restart your Autodesk product to activate the app/plugin. To uninstall this plugin, exit the Autodesk product if you are currently running it, simply rerun the installer and select the "Uninstall" button. OR click Control Panel > Programs > Programs and Features (Windows 7/8.1/10/11) and uninstall as you would any other system application.

其他信息

已知问题

The app doesn't work fine by selecting closed polylines whether to slope top polyline or slope bottom polyline. In this case, is recommended to break the closed polylines and execute the app to each of them.

联系

公司名称: ADSON A N BALBINO ENGENHARIA
支持联系人: adson.adcad@gmail.com

作者/公司信息

ADSON A N BALBINO ENGENHARIA

支持信息

For support write to adson.adcad@gmail.com

版本历史

版本号 版本描述

1.0.0

Added 2025 support.
回到页首