-Call the plugin with the "DOOR" command or directly on the ribbon in the plugins area (just place the app icon)

-Choose a type of door

• Single
• Double

-Specify the width of the door, this data can be in meters, millimeters, inches, feet, or any system that the user uses.

-Specifies the thickness of the door, this data can be in meters, millimeters, inches, feet, or any system that the user uses.

-Specify a color for the door

-Press accept

In model or layout space 

-Specifies a point on the wall for door insertion

By default, the proximity OSNAP is activated by pressing the 'E' key + ENTER the proximity will be deactivated and the midpoint, start, and end will be activated.

This way the user will be able to use the OSNAP extension.

-Specifies wall thickness this point must be perpendicular to the insertion point

-Specifies the direction of the door opening

-The end

Door direction example 

On horizontal wall

Specifies a door insertion point.

• If the top line is chosen the door will open in this direction (up)
• If the lower line is chosen, the door opens downwards.

Specifies a point that represents the thickness of the wall (perpendicular to the insertion point)  

Direction

Specify the direction by clicking on the right or left of the insertion point

• If you click on the right part, the arch of the door will be on the right and the door on the left.
• If you click on the left part, the arch of the door will be on the left, and the door on the right. 

On vertical wall 

Specifies a door insertion point.

• If the right line is chosen, the door will open in this direction.
• If the left line is chosen, the door opens to the left.

Specifies a point that represents the thickness of the wall (perpendicular to the insertion point)  

Direction

Specify the direction by clicking at the top or bottom of the insertion point.

• If you click on the upper part, the arch of the door will be at the top and the door at the bottom.
• If you click on the lower part the arch of the door will be at the bottom and the door at the top. 

The same logic applies to sloped walls.

The installer that ran when you downloaded this app/plug-in from the Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin. You may need to restart the Autodesk product to activate the app/plug-in. To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8.1/10/11) and uninstall as you would any other application from your system.