It's decent for small projects. However, the cut operation to make the screw head cuts all bodies, not only the screw, so it makes hex nut shaped holes on other components. It also takes a few seconds to load all the pre-sets, a lot of which are not needed. 

this is really good, but how do i make it "molded"? and also how do i change the pitch?

Bei der Freeversion vom 2024 Fusion360 weisen alle Tutorials zur Schrauben erstellung auf aktionen die kostenplfichtig sind, ohne die die Schraube kein Gewinde hat.

Danke dass dies Addon for free ist.

Mir gefällt nicht (oder ich bin zu doof)

- die Auswahl der Schraubengröße ist unübersichtlich

- die Ausgewählte Schraube wird in den Einstellungen niht angezeigt

- nach Fertigstellung der Schraube muss das Gewinde mit einigen Klicks erst modeliert werde (nicht intuitiv / Anleitung nötig)

- abschließend muss oben bei jeder Schraube noch ein Überstand entfernt werden.

Für jemand der mal eben eine Schraube 3D drucken möchte ist das ohne Tutorials nicht möglich.

Trotzdem 3 Sterne, weil ich nicht weiß woran es liegt und auch nix besser gefunden habe. (außer Freecad > umsonst > einfach > funktioniert)

nice,but would be better with more features

Great for creating a screw, but cannot adjust thread manually.

No TPI adjustment options.

It's easy enough to create a bolt by creating a cylinder and then apply a thread to it.

What I really want is to be able to declare threads-per-inch.

Would it be possible to add options to customize the screw (ie. pitch, thread angle, minor diameter)? Currently it seems we can only set the screw's height, width and the size of the head.

Thank you!

I have downloaded it but it won't load when i select it in Fusion 360? 

It is listed in the Plug-Ins drop-down menu, but nothing happens when the run button is enabled. Also, there is no start button listed under the Insert or Create menus. Enabling run at startup seems to do nothing.

I am using the education version, is it missing the relevant documents?

hi am i missing something as looking at the plugin you can still only pick a define thread from the section IE 10mm 4mm 6mm i need to make a thread that is 19mm so being able to put that value in or select it would help more thanks 

Hi, I read that the plugin has beed updated, but, I still can't run it.

There is updated version here, but it still does not run, could u help me?

Tried to download it but it is not working.
Would be great to design your own threads.
The "Spiral" mode is not helpfull to make exact threads.

Title says it all: at least for me I am unable to run the addon. https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/Scripts-and-Add-Ins-do-not-run-after-the-September-update-of-Fusion-360.html

( ͡° ͜ʖ ͡°)

Thank you !

:D Muchas gracias.

Please, make it for macos

I would like to sugest adding in American Standard thread sizes.  it would also be nice to chane the cap to philips head. and an option to model the threads on the compnent.

Great creator ! Thanks !!!

Good job! Is there any way to delete the center screw before the others are created? If I have material in the center, it cuts the first screw into my design.

Great plug in

Die App ist einfach strukturiert und kann leicht bedient werden. Achtung: keine Parameter per maus ändern, da sonst massenweise Fehlermeldung kommen!