Reitec.Testplan
Win64, EnglishGeneral Usage Instructions
The engineer can mark distinctly all dimensions relevant for quality assurance during the preparation of the drawing. To do this, numerous functions are available in the drawing view. The main element is a stamp icon (a circle with an arrow and a number) that can be assigned to any check dimension. The arrow tip points to the associated check dimension. Each stamp icon is a sketched symbol. The name of the sketched symbol consists of the prefix “VDA_Stamp_” and the angle in degrees of the arrow.
Fully automatic marking: In automatic mode, a stamp icon is assigned to each dimension in the drawing. The marking is performed clockwise on each drawing view. All icons that are not needed can subsequently be deleted.
Manual marking: This function allows you to mark one or several particular dimensions. Reitec.Testplan automatically assigns the next free consecutive number. By design missing numbers are not reused automatically, to reuse it the user must use the function ‘Refresh / Re-number’.
Free marking: Particular geometric elements in a drawing cannot be marked in automatic mode. The elements that are not supported can be marked with a "free" icon.
Refresh/Re-number: In most cases, only particular dimensions in a drawing are relevant for testing. Other dimensions need not be marked. If the user deletes markings after an automatic run, the "Refresh/Re-number" function is available to re-establish the consecutive numbering. During the re-numbering process, the arrow points are freshly aligned to the associated geometric element.
Export: The export function allows the user to transfer the check data automatically from the drawing to a machine-readable format without manual intervention. In this process, all marked dimensions are evaluated and exported to a csv-file together with all relevant details (number, value, tolerance and unit).
Screenshots
Commands
| Ribbon/Toolbar Icon | Command | Command Description |
|---|---|---|
|
Generate Stamp Icons |
Automatically adds stamp icons to all the dimensions of the sheet. This is done view by view in a clockwise order. The stamp numbers are calculated in an ascending way. |
|
Edit |
Shows a dialog where the user can edit the data of the selected characteristic. |
|
Delete all |
Deletes all stamp icons in the drawing. |
|
Add Free Stamp Icon |
Not all items in the Autodesk® Inventor® drawing view can be automatically marked with an icon. To be able to mark such elements, a free symbol of any type can be created. |
|
Stamp wizard |
Create similar testplans with a consistent order of the dimensions for similar products. |
|
Refresh |
Rearranges the stamp icons so that the stamp arrow points towards the attached dimension. The numbers will be preserved. |
|
Export |
Saves all dimension values and the tolerances into a csv-file or an excel-file. |
|
Add Stamp Icon |
Add a stamp icon for the selected dimensions. The user can freely define the number to use or use the preset value. Numbers are unique within a drawing. |
|
Refresh and Renumber |
Rearranges the stamp icons, so that the stamp arrow points towards the attached dimension. Also the numbers will be recalculated so that there are no spaces. |
|
Copy All |
Copies all inspection characteristics (symbols) of the current inspection plan layer to another inspection plan layer. |
|
Create table |
With the command 'Create table' a table with test characteristics can be inserted into the drawing. |
|
Project parameter |
Shows the dialog for editing the project parameters. |
Installation/Uninstallation
The installer that ran when you downloaded this app/plugin from Autodesk App Store has already installed the app/plugin.
You can unload the plugin without uninstalling it by unchecking the "Loaded/Unloaded" check box associated with the plugin in the Inventor Add-In Manager.
You may have to restart Inventor to completely unload the application.
To uninstall this plugin, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button.
OR, you can uninstall it from 'Control Panel\Programs\Programs and Features' (Windows 7+) or Add/Remove Programs, just as you would uninstall any other application from your system.
Enter the license key or click on the next button to install the app under trial mode.
Additional Information
(C) Copyright 2010-2023 by REITEC GmbH, Eberdingen REITEC PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS. REITEC SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. REITEC. DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE UNINTERRUPTED OR ERROR FREE.
Known Issues
None
Contact
Author/Company Information
Support Information
Send an email to info@reitec-software.com
Version History
| Version Number | Version Description |
|---|---|
|
3.7.0.0 |
- Inventor 2025 - added Teststep-type "weld" - adjusted Options-Dialogue - Initialisation of XML name |
|
3.6.1.0 |
- Inventor 2024 - added Teststep-type "weld" - adjusted Options-Dialogue - Initialisation of XML name |
|
3.5.0.0 |
- Inventor 2023 - New calculation functions: CountDoubles, Replace - Table overview of test characteristics |
|
3.3.6.0 |
- Inventor 2022 - New calculation functions: CountDoubles, Replace - License settings are saved separately - Common settings are now saved only when settings are unlocked. - Error with geometric tolerances without leader line - Error options “Table” wrong value name - Error when marking coordinate dimensions - New property “Text” - Error when deleting when several documents are open - Setting value “Update project parameters” is now saved in the central settings - COM export interface to automate the export process - Filter for holes and threads - Optimization of the positioning of the stamp symbol for geometric tolerances and surface symbols - Error in export of general tolerances based on accuracy SUP-#289 - Options: Update of file properties when opening the options dialog DEVOPS-#273 |
|
3.3.1.0 |
• Support of Autodesk® Inventor® 2021 • Rounding problem with minor deviations at 10th decimal place e.g. 91.499999999999 • Updating the characteristic data when updating (& re-number) the stamps • Improvement when processing overwritten chamfer designations |
|
3.1.2.0 |
• Support Inventor 2020 |
|
3.0.6.0 |
• Change to existing number. • Detection of old file format. • Decimal separator. • Some dialog aren't displayed completely if display is scaled. • “Delete all” doesn't delete all markers. • Extension of export file name. • Export of Testplan.Author data. |
|
3.0.2.0 |
- Conversion to extended feature dialogs - Changeover to Testplan.Author project data - BUG: Refresh & Re-Number: New number was not saved - Support of Inventor 2019 - Copy labels to another inspection plan - Project parameters - Optimization of license mechanism (Computer ID) - Shared settings are now password protected |
