This Application is divided into many panels:

1-    Select the Sprinkler Piping Configuration.

2-    Select Network.

3-    Select the unit (Metric and Imperial).

4-    Select Pipe Material Type (Steel and Copper).

5-    Calculate Size of Fire Fighting Pipes.

6-    Activation Code.

7-    Organization Tools (Close and Help).

8-    Contact Information.

Use the following points to illustrate the steps:

1-    Select Pipe configuration such as Tree, Grid or Loop Pipe configuration according to the shape of networks, as the following table illustrates the type of Pipe configuration

2-    Select Hazard Types. There are 5 types of Hazard according to NFPA 13 that classifies the occupancies according to the quantity and combustibility of contents, the expected rates of heat release, the total potential for energy release, the heights of stockpiles, and the presence of flammable and combustible liquids as the followings:

1. Light Hazard Pipe Schedule
2. Light Hazard Above & Below sprinklers
3. Ordinary Hazard Pipe Schedule
4. Ordinary Hazard Above & Below sprinklers
5. Extra Hazard Pipe Schedule 

3-    Select the network, and the panel shows all Components of the network that have been selected such as Sprinkler, Pipes, Pipe Fittings, and Pipe Accessories. 

4-    Select the unit (Metric or Imperial) and Select Material (Steel or Copper), and the following tables to illustrate the size of Firefighting of each case according to NFPA 13.

5-    Finally, click “Run” to start calculating the size of firefighting pipes.

The installer that ran when you downloaded this app/plug-in from Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin.

To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8.1/10) and uninstall as you would any other application from your system.